First Prev Record 1404 - 1453 of 3995 Next Last
Jeter, S. T., Sarver, E. A., McNair, H. M., and Rezaee, M., 2016, “4-MCHM Sorption to and Desorption from Granular Activated Carbon and Raw Coal”, Chemosphere Journal, v. 157, pp. 160-165. (5-Year Impact Factor: 4.068)
Jiang, H. and U. V. Shanbhag, (2016). On the Solution of Stochastic Optimization and Variational Problems in Imperfect Information Regimes, SIAM Journal of Optimization,, v. 26 (4), pp. 2394–2429.
Jin, T., L. F. Ayala H., and M. T. Ityokumbul, (2016). Network Modeling and Prediction of Retrograde Gas Behavior in Natural Gas Pipeline Systems, International Journal of Engineering Systems Modelling and Simulation, v. 8 (3), pp. 169-182.
Kang, D., V. Kalaskar, D. Kim, J. Martz, A. Violi, and A. Boehman, (2016). Experimental study of autoignition characteristics of Jet-A surrogates and their validation in a motored engine and a constant-volume combustion chamber, Fuel, v. 184, pp. 565-580.
Khadilkar, A. B., P. L. Rozelle, and S. V. Pisupati, (2016). Review of particle physics and chemistry in fluidized beds for development of comprehensive ash agglomeration prediction models, Energy & Fuels, v. 30 (5), pp. 3714-3734.
Khorsandi, S., and R. T. Johns, (2016 June 29). Robust Flash Calculation Algorithm for Microemulsion Phase Behavior,” Journal of Surfactant and Detergents, v. 19 (6), pp. 1273-1287.
Khorsandi, S., C. Qiao, and R. T. Johns, (2016 April 11-13). Displacement Efficiency for Low Salinity Polymer Flooding Including Wettability Alteration, SPE 179695, Society of Petroleum Engineers Improved Oil Recovery Conference, Tulsa, Oklahoma.
Khorsandi, S., C. Qiao, and R. T. Johns, (2016 October 1). Simulation of Surfactant/Polymer Floods With a Predictive and Robust Microemulsion Flash Calculation, Society of Petroleum Engineers. doi:10.2118/179566-PA.
Khorsandi, S., C. Qiao, R. T. Johns, and V. A. Torrealba, (2016 April 11-13). Simulation of Surfactant-Polymer Floods with a Novel Microemulsion Equation of State. SPE 179566, Society of Petroleum Engineers Improved Oil Recovery Conference, Tulsa, Oklahoma.
Krishnamoorthy, V., and S. V. Pisupati, (2016). Fate of sulfur during entrained flow gasification of Pittsburgh No. 8 coal: Influence of particle size, sulfur forms and temperature, Energy & Fuels, v. 30 (4), pp. 3241–3250.
Kugai, J., J. T. Miller, E. B. Fox, and C. S. Song, (2016 November 25). In-situ X-ray absorption study of ceria-supported Pd-Cu nanoparticles for oxygen-enhanced water gas shift, Applied Catalysis A: General, v. 528, pp. 67-73, ISSN 0926-860X.
Kumar, Ashish R., W. C. Wedding, A. Jolly, S. Arya, and T. Novak, (2016). Modeling capture efficiency for a flooded bed dust scrubber incorporated into a longwall shearer using a small scale physical model and CFD, Society for Mining, Metallurgy and Exploration, pp. 584-586, [9781510825659].
Kumar, H., D. Elsworth, J. P. Mathews, and C. Marone, (2016). Permeability evolution analogies in sorbing media: a comparison between organic-rich shale and coal, Geofluids, v. 16, pp. 43-55.
Landry, J. R., and A. M. Bento, (2016). On the Trade-Offs of Regulating Multiple Unpriced Externalities with a Single Instrument: Evidence from Biofuel Policies.
Landry, J. R., R. Klotz, and A. M. Bento, (2016). Economic Insights Required for Using Lifecycle Analysis for Policy Decisions.
Leung, J. Y. and S. Srinivasan, (2016). Effects of reservoir heterogeneity on scaling of effective mass transfer coefficient for solute transport, Journal of Contaminant Hydrology, v. 192, pp. 181-193, https://doi.org/10.1016/j.jconhyd.2016.07.007.
Li, K., Y. Zhao, M. J. Janik, C. S. Song, and X. Guo, (2017 February 28). Facile preparation of magnetic mesoporous Fe3O4/C/Cu composites as high performance Fenton-like catalysts, Applied Surface Science, v. 396, pp. 1383-1392, ISSN 0169-4332.
Li, Xiang, Z. Feng, G. Han, D. Elsworth, C. Marone, D. Saffer, and D. S. Cheon, (2016). Breakdown pressure and fracture surface morphology of hydraulic fracturing in shale with H2O, CO2 and N2, Geomechanics and Geophysics for Geo-Energy and Geo-Resources, v. 2, pp. 63-76.
Li, Y., Xiaoxing X. Wang, C. S. Song, (2016). Spectroscopic Characterization and Catalytic Activity of Rh Supported on CeO2- Modified Al2O3 for Low-Temperature Steam Reforming of Propane, Catalysis Today, v. 263, pp. 22–34.
Liu, J., Y. B. Yao, D. Elsworth, Z. J. Pan, X. X. Sun, and W. H. Ao, (2016). Sedimentary characteristics of the Lower Cambrian Niutitang shale in the southeast margin of Sichuan Basin, China, Journal of Natural Gas Science & Engineering, v. 36, pp. 1140-1150.
Liu, Shimin, S. Harpalani, and Y. Wang, (2016). Anisotropy characteristics of coal shrinkage/swelling and its impact on coal permeability evolution with CO2 injection, Greenhouse Gases: Science and Technology, v 6, pp 1-18.
Louw, E., G. D. Mitchell, R. E. Winans, and J. P. Mathews, (2016). Constitution of drop-tube generated coal chars from vitrinite-rich and inertinite-rich South African coals, Energy & Fuels, v. 30, pp. 112-120.
Lu, M., J. Zhu, M. Li, Y. Shan, M. He, and C. S. Song, (2016). TiO2-Modified Pd/SiO2 for Catalytic Hydrodeoxygenation of Guaiacol, Energy & Fuels, v. 30 (8), pp. 6671-6676.
Luo, L., A. F. Zhang, M. J. Janik, C. S. Song, and X. W. Guo, (2016). “Mesoporous graphitic carbon nitride functionalized iron oxides for promoting phenol oxidation activity,” Royal Society of Chemistry, v. 6, pp. 91960-91967.
Luo, L., A. F. Zhang, M. J. Janik, C. S. Song, and X. W. Guo, (2016). Facile Fabrication of Metal-free Urchin-like g-C3N4 with Superior Photocatalytic Activity, RSC Advances, v. 6, pp. 94496-94501.
Luo, L., A. Zhang, M. J. Janik, K. Li, C. S. Song, and X. Guo, (2017 February 28). Facile fabrication of ordered mesoporous graphitic carbon nitride for RhB photocatalytic degradation, Applied Surface Science, v. 396, pp. 78-84, ISSN 0169-4332.
Luo, L., C. Y. Dai, A. F. Zhang, J. H. Wang, C. S. Song, and X. W. Guo, (2016). Evolution of Iron Species for Promoting Catalytic Performance of FeZSM-5 in Phenol Oxidation, RSC Advances, v. 6, pp. 32789-32797.
Lvov S. L., and A. H. Harvey, (2015-2016). Ionization Constant of Water, In "CRC Handbook of Chemistry and Physics", Ed. W.M. Haynes, 96th Ed., pp. 5-70.
Ma, C. F., C. M. Dong, G. Q. Luan, C. Y. Lin, X. C. Liu, and D. Elsworth, (2016). Types, characteristics and effects of natural fluid pressure fractures in shale: a case study of the Paleogene strata in Eastern China, Petroleum Exploration and Development, v. 43 (4), pp. 634-643.
Magzymov, D., C. Qiao, and R. T. Johns, (2016 September 26-28). Impact of Surfactant Mixtures and Distributions on Microemulsion Phase Behavior, accepted for 2016 Society of Petroleum Engineering Annual Technical Conference and Exhibition, Dubai, U.A.E.
Magzymov, D., C. Qiao, and R. T. Johns, (2016 September 26). Impact of Surfactant Mixtures on Microemulsion Phase Behavior, Society of Petroleum Engineers. doi:10.2118/181651-MS.
Manafpour, A., T. Hopper, F. Rajabipour, A. Radlinska, G. P Warn, P. Shokouhi, D. Morian, and S. Jahangirnejad, (2016). "Field Investigation of In-Service Performance of Concrete Bridge Decks in Pennsylvania", Transportation Research Record: Journal of the Transportation Research Board, (2577), pp. 1–7.
Manser, N., Meng Wang, S. Ergas, J. Mihelcic, A. Mulder, J. van de Vossenberg, J. van Lier, and P. van der Steen, (2016) Biological nitrogen removal in a photo-sequencing batch reactor with an algal-nitrifying bacterial consortium and anammox granules, Environmental Science & Technology Letters, v. 3, pp. 175-179.
McDonald-Buller, E., Y. Kimura, M. Craig, G. McGaughey, D. Allen, and M. D. Webster, (2016). Dynamic Management of NOx and SO2 Emissions in the Texas and Mid-Atlantic Electric Power Systems and Implications for Air Quality, Environmental Science and Technology, v. 50(3), pp. 1611-1619, https://doi.org/10.1021/acs.est.5b04175.
Min, B., A. Nwachukwu, S. Srinivasan, and M. F. Wheeler, (2016). Selection of geologic models based on pareto-optimality using surface deformation and CO2 injection data for the in salah gas sequestration project, Society of Petroleum Engineers - SPE Annual Technical Conference and Exhibition, ATCE 2016 Proceedings, 9781613994634.
Mukherjee, A., and S. V. Pisupati, (2016). Effect of additives on interfacial interactions for viscosity reduction of carbonaceous solid–water slurries, Fuel, v. 180, pp. 50-58.
Naraghi, M. E., K. Spikes, and S. Srinivasan, (2016). 3-D reconstruction of porous media from a 2-D section and comparisons of transport and elastic properties, Society of Petroleum Engineers - SPE Western Regional Meeting Proceedings, [9781613994658].
Negahdar, L., A. Gonzalez-Quiroga, D. Otyuskaya, H. E. Toraman, L. Liu, J. T. Jastrzebski, K. M. Van Geem, G. B. Marin, J. W.Thybaut, and B. M. Weckhuysen, (2016). Characterization and comparison of fast pyrolysis bio-oils from pinewood, rapeseed cake, and wheat straw using 13C NMR and comprehensive GC× GC, ACS Sustainable Chemistry & Engineering, v. 4 (9), pp. 4974-4985.
Nie, X. W., H. Z. Wang, M. J. Janik, X. W. Guo, and C. S. Song, (2016). Computational Investigation of Fe–Cu Bimetallic Catalysts for CO2 Hydrogenation, The Journal of Physical Chemistry C, v. 120 (17), pp. 9364-9373.
Noack, C. W., K. Perkins, N. Washburn, D. A. Dzombak, and A. K. Karamalidis, (2016). Effects of ligand chemistry on rare earth element partitioning from saline solutions to functionalized adsorbents, ACS Sustainable Chemistry and Engineering, v. 4 (11), pp. 6115–6124.
Nojabaei, B., and R. T. Johns, (2016). Extrapolation of black-and volatile-oil fluid properties with application to immiscible/miscible gas injection, Journal of Natural Gas Science and Engineering, v. 33, pp. 367-377.
Nojabaei, B., N. Siripatrachai, R. T. Johns, and T. Ertekin, (2016). Effect of Large Gas-Oil Capillary Pressure on Production: A Compositionally-Extended Black Oil Formulation, Journal of Petroleum Science and Engineering, v. 147, pp. 314-329.
Palmintier, B. S. and M. D. Webster, (2016). Impact of Operational Flexibility on Electricity Generation Planning with Renewable and Carbon Targets, IEEE Transactions on Sustainable Energy, v. 7(2), pp. 672-684, [7350236]. https://doi.org/10.1109/TSTE.2015.2498640.
Patnaik, A. and J. L. Goldfarb, (2016). “Continuous Activation Energy Representation of the Arrhenius Equation for the Pyrolysis of Cellulosic Materials: Feed Corn Stover and Cocoa Shell Biomass,” with A. Patnaik. Cellulose Chemistry and Technology, v. 50, pp. 311-320.
Phaiboonpalayoi, C., and R. T. Johns, (2016 November 14 – 18). Solutions to Coning Under Simultaneous Three Phase Flows, accepted for 2016 International Petroleum Technology Conference (IPTC), Bangkok, Thailand.
Pogacnik, J., D. Elsworth, M. O’Sullivan, and J. O’Sullivan, (2016). A damage mechanics approach to the simulation of hydraulic fracturing/shearing around a geothermal injection well, Computers & Geotechnics, v. 71, pp. 338-351.
Puyang, P., A. Dahi Taleghani, and B. Sarker, (2016). An Integrated Modeling Approach for Natural Fractures and Post Treatment Fracturing Analysis: A Case Study, Journal of Interpretation November- January, v. 4 (4), pp. T493-T504.
Qiao, C., L. Li, R. T. Johns, and J. Xu, (2016). Compositional Modeling of Dissolution-Induced Injectivity Alteration During CO2 Flooding in Carbonate Reservoirs, Society of Petroleum Engineering Journal, v. 21 (03), pp. 809-826, [SPE-170930-PA], doi:10.2118/170930-PA.
Qiao, C., R. T. Johns, and J. Li, (2016 May 30- June 2). Understanding the Chemical Mechanisms for Low Salinity Waterflooding, SPE 180138, 78th EAGE Conference and Exhibition held in Vienna, Austria.
Qiao, C., R. T. Johns, and L. Li, (2016). Modeling Low-Salinity Waterflooding in Chalk and Limestone Reservoirs, Energy & Fuels, v. 30 (2), pp. 884-895, DOI: 10.1021/acs.energyfuels.5b02456