Ghamari, M., c. Soltanpur, P. Rangel, W. A. Groves, and V. Kecojevic, (2022). Laboratory and field evaluation of three low-cost particulate matter sensors, IET Wireless Sensor Systems, https://doi.org/10.1049/wss2.12034.
|
Wasco, R. S. and B. G. Miller, (2021 January 21). "Fermenter Syrup Characterization Project: Chemical Fractionation Testing Final Report," Prepared for The Babcock & Wilcox Company.
|
Feng, F., G. Song, J. Xiao, L. Shen, and S. V. Pisupati, (2019). Carbon deposition on Ni-based catalyst with TiO2 as additive during the syngas methanation process in a fluidized bed reactor, Fuel, v. 235, pp. 85-9.
|
Krishnamoorthy, V., N. Krishnamurthy, and S. V. Pisupati, (2019). Intrinsic gasification kinetics of coal chars generated in a high-pressure, high-temperature flow reactor, Chemical Engineering, v. 235, paper 122028.
|
Khadilkar, A. B., P. L. Rozelle, and S. V. Pisupati, (2018). Investigation of fluidized bed agglomerate growth process using simulations and SEM-EDX characterization of laboratory-generated agglomerates, Chemical Engineering Science, v. 184, pp. 172-185, ISSN 0009-2509, https://doi.org/10.1016/j.ces.2018.03.035.
|
Miller, B. G., (2018). “Chapter 9: The Development of Post Combustion Control Technology,” p. 237-276, in Coal-Fired Electricity and Emissions Control: Efficiency and Effectiveness, D.A. Tillman, author, Butterworth-Heinemann, Oxford, UK.
|
Pallarés, J., A. B. Khadilkar, B. Simcock-Bailey, and S. V. Pisupai, (2018 November 15). Role of condensed phases in the agglomeration of low rank coal ash in fluidized beds, Fuel, v. 232, pp 1-11.
|
Yanosky, J. D., J. Fisher, D. Liao, D. Rim, R. Vander Wal, W. Groves, and R. C. Puett, (2018). Application and validation of a line-source dispersion model to estimate small scale traffic-related particulate matter concentrations across the conterminous US, Air Quality, Atmosphere & Health, v.11, pp 741–754. https://doi.org/10.1007/s11869-018-0580-6
|
Khadilkar, A. B., P. L. Rozelle, and S V. Pisupati, (2017). Validation Attempts of Proposed Particle-level Growth Mechanism of Ash Agglomerates in Fluidized Bed Combustors, AIChE Annual Meeting, Volume: ISBN: 978-0-8169-1097-7.
|
Miller, B. G., (2017). Clean Coal Engineering Technology, 2nd edition, Buttwerworth-Heinemann, 838 pp.
|
Morrison, J. L., B. G. Miller, and C. Song, (2017 June 11 - 15). “University Coalition for Fossil Energy Research,” 42nd International Technical Conference on Clean Energy, Clearwater, Florida.
|
Tchapda, A. H., V. Krishnamoorthy, Y. D. Yeboah, and S. V. Pisupati, (2017). Analysis of tars formed during co-pyrolysis of coal and biomass at high temperature in carbon dioxide atmosphere, Journal of Analytical and Applied Pyrolysis, v. 128, pp. 379-396, ISSN 0165-2370, https://doi.org/10.1016/j.jaap.2017.09.011.
|
Jammulamadaka, H. S., H. B. Vuthaluru, D. H. French, and S. V. Pisupati, (2015 June 29). A study of Indian limestones for sulfur capture in FBC plants: Particle size sensitivity of sulfation behavior, Fuel, ISSN 0016-2361.
|
Miller, B. G., (2015). Fossil Fuels Emissions Control Technologies: stationary heat and power systems, Butterworth-Heinemann, 504 pp.
|
Pulati, N., A. Lupinsky, B. G. Miller, and P. Painter, (2015). “Extraction of Bitumen from Oil Sands using Deep Eutectic Ionic Liquid Analogues,” Energy and Fuels, v. 29, pp. 4927-4935.
|
Tchapda, A. H., and S. V. Pisupati, (2015). "Characterization of an entrained flow reactor for pyrolysis of coal and biomass at higher temperatures," Fuel, v. 156, pp. 254-266
|
Falcone Miller, S., and B. G. Miller, (2014 November 4-6). “Combustion Performance and Ash Chemistry Effect when Cofiring Pressed Algae and Coal,” 4th IEA Clean Coal Centre Workshop on Cofiring Biomass with Coal Workshop, University Park, Pennsylvania.
|
Falcone Miller, S., and B. G. Miller, (2014 November 4-6). Combustion Performance and Ash Chemistry Effect when Cofiring Pressed Algae and Coal, 4th IEA Clean Coal Centre Workshop on Cofiring Biomass with Coal Workshop, University Park, Pennsylvania.
|
Gibson, L. T. M., L. J. Shadle, and S. V. Pisupati, (2014). “Determination of Sticking Probability Based on the Critical Velocity Derived from a Visco-Elastoplastic Model to Characterize Ash Deposition in an Entrained Flow Gasifier,” Energy & Fuels. DOI: 10.1021/ef5008616.
|
Falcone Miller, S., and B. G. Miller, (2013 September 29 - October 3). “Combustion Performance and Ash Chemistry when Cofiring Pressed Algae and a High-Volatile A Bituminous Coal, 2013 International Conference on Coal Science and & Technology, State College, Pennsylvania.
|
Gibson, L., N. Soundarrajan, J. Spenik, J. Ma, S. Lawrence, and S. V. Pisupati, (2013). “Application of Particle Population Model to Determine the Contribution to Slag, Flyash, Syngas In Entrained Flow Gasification from Particle Size Distribution” Energy and Fuels, v. 27 (12), pp. 7681–7695.
|
Miller, B. G., (2013). “Chapter 3. Fuel preparation and combustion, burner design,” in Ultra-supercritical coal power plant, D. Zhang, editor, Woodhead Publishing, Cambridge, UK.
|
Miller, B. G., S. Falcone Miller, D. A. Johnson, and R. S. Wasco, (2013 November 22). “Bubbling Fluidized-Bed Characterization Testing of DuPont’s Lignin Filter Cake and Concentrated Syrup By-Products at Penn State University,” Prepared for Babcock & Wilcox Research Center.
|
Mohan, A. R., U. Turaga, V. Shembekar, D. Elsworth, and S. V. Pisupati, (2013). Utilization of carbon dioxide from coal-based power plants as a heat transfer fluid for electricity generation in enhanced geothermal systems (EGS), Energy, v. 57, pp. 505-512.
|
Chandra, D., C. Caleb, D. Hall, N. Montebello, A. Weiner, S. V. Pisupati, U. Turaga, G. Izadi, A. Ram Mohan, and D. Elsworth, (2012). “Pairing Integrated Gasification and Enhanced Geothermal Systems (EGS) to Reduce Consumptive Water Usage in Arid Environments.”, Energy & Fuels,26(12): p. 7378-7389.
|
Lin, M. I., W. A. Groves, A. Freivalds, E. G. Lee, and M. Harper, (2012 May). Comparison of artificial neural network (ANN) and partial least squares (PLS) regression models for predicting respiratory ventilation: An exploratory study, European Journal of Applied Physiology, v. 112 (5), pp. 1603-11.
|
Marpoe, B. S., W. A. Groves, E. G. Lee, J. E. Slaven, and M. Harper, (2012). Effects of covered solid sorbent tube sample holders on organic vapor measurements, Journal of Occupational and Environmental Hygiene, v. 9(10), pp. 572-9.
|
Miller, B. G., S. Falcone Miller, D. A. Johnson, R. S. Wasco, and Q. Yang, (2012 October 29). “Bubbling Fluidized-Bed Biomass Fuels Characterization Testing at Penn State University (Lignin Testing),” Prepared for Babcock & Wilcox Research Center.
|
Miller, B. G., S. Falcone Miller, D. A. Johnson, R. T. Wincek, R. S. Wasco, D. Alvarez Fonseca, and Q. Yang, (2012 March 25). “Bubbling Fluidized-Bed Biomass Fuels Characterization Testing at Penn State University (Corn Stover Testing),” Prepared for Babcock & Wilcox Research Center, 361 pages.
|
Özgür, E., S. Falcone Miller, B. G. Miller, and M. V. Kök, (2012). “Thermal Analysis of Co-firing of Oil Shale and Biomass Fuels,” Oil Shale, v. 29 (2), pp. 190-201.
|
Pou, J. O., Y. E. Alvarez, J. K. Watson, J. P. Mathews, and S. V. Pisupati, (2012). “Co-primary thermolysis molecular modeling simulation of lignin and subbituminous coal via a reactive coarse-grained simplification”, Journal of Analytical and Applied Pyrolysis, v. 95, pp. 101-111.
|
Soundarrajan, N., N. Krishnamurthy, and S. V. Pisupati, (2012). “Physical and Chemical Characterization of Coal Particles Used as Entrained Flow Gasifier Feedstock: Heterogeneity in Mineral Matter Distribution”, Energy Procedia, v. (14), pp. 1735-1740.
|
Soundarrajan, N., P. Rozelle, and S. V. Pisupati, (2012). “Development and Use of a Method for Prediction of the Ash Split in a CFBC Boiler to Improve the Energy Efficiency,” Fuel, v. (102), pp. 9-15.
|
Bradley, L. C., S. Falcone Miller, B. G. Miller, and D. A. Tillman, (2011). “A Study on the Relationship between Fuel Composition and Pyrolysis Kinetics,” Energy & Fuels, v. 25, pp. 1989-1995.
|
Chandra, D., C. Conrad, D. Hall, N. Montebello, A. Weiner, A. Narasimharaju, V. Rajput, E. Phelan, S. Pisupati, U. Turaga, G. Izadi, A. Ram Mohan, and D. Elsworth, (2011 October). Combined scCO2-EGS IGCC to reduce carbon emissions from power generation in the desert southwestern United States, Trans. Geotherm. Res. Council. 20 pp.
|
Lapuerta, M., M. T. Villajos, J. R. Agudelo, and A. L. Boehman, (2011). Key Properties and Blending Strategies of Hydrotreated Vegetable Oil as Biofuel for Diesel Engines, Fuel Processing Technology, v. 92, DE-j.fuproc.2011.09.003, pp. 2406-2411.
|
Miller, B. G., (2011). Clean Coal Engineering Technology, Butterworth-Heinemann, Oxford, United Kingdom, 696 pp.
|
Mohan, A. R., U. Turaga, V. Shembekar, S. Viswanathan, S. V. Pisupati, and D. Elsworth, (2011 October). Pairing of an Integrated Gasification Combined Cycle Power Plant (IGCC) with CO2-EGS as a Strategy for Deployment in Arid Regions, Transactions - Geothermal Resources Council, 20 pp.
|
Naredi, P., and S. V. Pisupati, (2011). Effect of CO2 during Coal Pyrolysis and Char Burnout in Oxy-Coal Combustion, Energy & Fuels, v. 25 (6), pp. 2452-2459.
|
Naredi, P., Y. D. Yeboah, and S. V. Pisupati, (2011). Effect of Furnace Purging on Kinetic Rate Parameter Determination Using Isothermal Theromgravimetric Analysis, Energy & Fuels, v. 25 (11), pp. 4937-4943.
|
Özgür, M. V., E. Kök, B. G. Miller, and S. Falcone Miller, (2011 May 11-13). “Co-combustion Performance of Oil Shale and Biomass Fuels,” 18th International Petroleum and Natural Gas Congress, Ankara, Turkey.
|
Falcone Miller, S., and B. G. Miller, (2010). “Chapter 7: Advanced gas cleaning systems for SOx/ NOx/ mercury control,” in Advanced power plants materials, design and technology, D. Roddy, editor, Woodhead Publishing, Cambridge, United Kingdom.
|
Lin, M. I., W. A. Groves, A. Freivalds, L. Lee, E. G. Lee, J. E. Slaven, and M. Harper, (2010). Laboratory evaluation of a physiologic sampling pump (PSP), Journal of Environmental Monitoring, v. 12 (7), pp. 1415-21.
|
Miller, B. G., (2010). “Chapter 8: Advanced dedusting systems/filters for ash and particulate control,” in Advanced power plants materials, design and technology, D. Roddy, editor, Woodhead Publishing, Cambridge, United Kingdom.
|
Miller, B. G., S. Falcone Miller, D. A. Johnson, R. T .Wincek, R. S. Wasco, Q. Yang, and D. Alvarez Fonseca, (2010 December 1). “Bubbling Fluidized-Bed Biomass Fuels Characterization Testing at Penn State University,” Prepared for Babcock & Wilcox Research Center, 363 pages.
|
Miller, B. G., S. Falcone Miller, R. S. Wasco, and R. T. Wincek, (2010 March 12). “Combustion and Emissions Performance when Firing Coal/Biocrude Blends,” Prepared for PetroAlgae, Inc., 91 pages.
|
Miller, B. G., S. Falcone Miller, R. S. Wasco, G. D. Mitchell, and D. A. Johnson, (2010 February 21). “Evaluation of Biomass Feedstocks in a Traveling Grate Stoker Simulator,” Prepared for Sumitomo Heavy Industries, Ltd., 153 pages.
|
Özgür, E., S. Falcone Miller, B. G. Miller, and M. V. Kök, (2010 October 11-14). “Co-Combustion Performance of Oil Shale and Biomass Fuels, “Twenty-Seventh Annual International Pittsburgh Coal Conference, Istanbul, Turkey.
|
Tillman, D. A., B. G. Miller, S. Falcone Miller, and L. Bradley, (2010 June 6-10). “Reactivity of Coal-Based Fuel Blends Measured in a Drop-Tube Reactor: Implications for Operations,” 35th International Technical Conference on Clean Coal Utilization & Fuel Systems, Clearwater, Florida.
|
Bradley, L., S. Falcone Miller, and B. G. Miller, (2009 May 12-14). “The Effect of Fuel Composition on Pyrolysis Kinetics,” 11th Annual Electric Power Conference & Exhibition, Chicago, Illinois.
|